Wired motorisation kit for roller shutter 40 kg - OCTO tube Ø 60 mm - 20 Nm

Warning: Switch not included in the kit.

This complete renovation kit is designed for the motorisation of a roller shutter weighing up to 40 kg.

The wired motor, placed inside a 60 mm diameter telescopic octagonal tube, drives the shutter curtain using the clip-on attachments for 8 mm slats supplied in the kit.

The end-stop adjustment, which is very easy, is done manually.

Safety, silence and comfort are ensured.

We recommend using the WKH138 stops.

Calculation of the curtain weight:
- Curtain weight = width x (height + 20 cm) x weight of slats per m²
- Weight of 8 mm slats: PVC = 4 kg/m², Foamed ALU = 4.5 kg/m², Extruded ALU = 7 kg/m², WOOD = 11 kg/m²

Dimensional limits:
• Traditional installation:
- Tube 1 only = bay width from 680 mm to 1,600 mm
- Tube 1 + tube 2 = bay width from 1,600 mm to 2,900 mm
• Renovation installation:
- Tube 1 only = bay width from 680 mm to 1,560 mm
- Tube 1 + tube 2 = bay width from 1,560 mm to 2,860 mm

Choice of attachments:

- An 8 mm slat corresponds to a slat height of 30 to 45 mm (attachments supplied in the kit).
- A 14 mm slat corresponds to a slat height of 50 to 60 mm (use the WKH883C screw-on attachments. Short screws supplied in the kit).

Choice of switch:
- Wired surface-mounted switch = reference C0013200
- Wired flush-mounted switch = reference C0013205

Kit contents:
- 1 wired motor Ø 45 mm 20 Nm (for roller shutters up to 40 kg)
- 1 cuttable telescopic octagonal tube Ø 60 mm
- 1 motor adapter kit Ø 45 mm for octagonal tube Ø 60 mm
- 1 wall bracket for star-head motor
- 4 clip-on attachments for 8 mm slats (for 14 mm slats, use the WKH883C screw-on attachments)
- 1 reinforced traditional type shaft end for octagonal tube Ø 60 mm + bracket
- 1 reinforced renovation type shaft end for octagonal tube Ø 60 mm with female dog clutch + bearing