Wired motor Ø 45 mm for 80 kg roller shutter - 50 Nm

This wired motor Ø 45 mm is designed to drive a roller shutter of up to 80 kg.

A manual override is integrated into the motor. In the event of a failure, it is possible to connect a 6-sided crank to operate the system manually.

The wired motors are intended for operation via a switch (unlike radio motors which are operated via a wireless control point such as a remote control or radio switch).

A wired motor can be paired with any switch, regardless of the brand (it simply needs to be a model designed for automation, that is, one that has the functions of raising, lowering and stopping). No constraints, you maintain control over the aesthetic aspect of the control point and/or can keep the existing ones when replacing a motor.

The adjustment of the end stops, very easy, is done manually.

Safety, silence and comfort are ensured.

For your roller shutters, we recommend using the end stops WKH138.

Choice of wall bracket:
- WZFC518A: galvanized steel immobilisation plate

Choice of adapter:
- WZFV310B for a wired motor Ø 45 mm in a OCTO 60 tube
- WZFV310D for a wired motor Ø 45 mm in a ZF 54 tube
- WZFV310E for a wired motor Ø 45 mm in a ZF 64 tube

Calculation of the curtain weight:
- Curtain weight = width x (height + 20 cm) x weight of slats per m²
- Weight of 8 mm slats: PVC = 4 kg/m², foamed ALU = 4.5 kg/m², extruded ALU = 7 kg/m², WOOD = 11 kg/m²

Kit contents:
- 1 wired motor Ø 45 mm 50 Nm (for roller shutters up to 80 kg)
- 1 rod for manual adjustment of the end stops

Options:
Slat fasteners and locks
End caps for octagonal tubes and ZF tubes
Switches and remote controls for roller shutters
Brackets and bearings
All accessories for roller shutters