SLID'UP 2300 sliding system for partition wall for recessed sliding door 730 x 2040 mm - 50 kg

Warning: Door not included in the kit.

SLID'UP 2300 sliding system for partition walls with frame included for wooden sliding door 730 x 2040 mm - 50 kg. Pocket door installation, possibility to remove the rail, no groove under the door for the bottom guide.

Structure height = 2300 min to 2500 mm max
Structure width = 1506 mm
Clear passage height = 1980, 2030 or 2105 mm (with SU2306 finishing kit)
Clear passage width = 700 or 705 mm (with SU2306 finishing kit)
Door height = 1985, 2040 or 2110 mm
Door width = 730 or 735 mm
Internal partition thickness = 100 mm
Finished partition thickness = 125 mm
Total thickness with SU2306 finishing = 145 mm

This system ensures you maximum space saving. No more wasted space due to the swing radius of a traditional hinged door.
The result of many hours of study and testing, our new frames guarantee unmatched rolling comfort (100,000 cycle warranty) ensuring silent movement.

It is possible to use a door with a minimum thickness of 25 mm by using the SU2307 guide.

For more information, please consult the installation manual.

Kit contents:
- 1 aluminium top rail length = 1425 mm
- 1 steel galvanised top rail support profile for a structure width of 1506 mm
- 4 vertical steel galvanised uprights L= 2242mm
- 1 steel galvanised lintel profile L=740 mm
- 2 frames with plastic ball bearing rollers and M8 screws
- 2 rail stops
- 2 zinc-plated steel plates to fix on top of the door
- 1 zinc-plated steel support for removable top rail
- 2 zinc-plated steel supports for uprights
- 1 plastic bottom guide assembled on zinc-plated steel support for doors 35 to 40 mm thick
- 2 wooden reinforcements for lintel profile
- 1 partition upright support
- 1 set of screws and keys

Options:
SU2212 : door closer damper
SU2306 : MDF finishing kit
SU2307 : bottom guide with groove
SU5023 : U-shaped PVC guiding profile
All spare parts for SLID'UP 2300